Terms — The battery recharge cycle finishes when all charge status gauge lamps go dark, as shown next. Even though it has a 3.5mm input, I did all of my testing wirelessly using mobile phones since I figure that’s how most people are going to be using this speaker anyway. In the box you’ll get the charging brick and cable along with the speaker and manuals. There is no battery status gauge that shows percentage of charge.

This speaker fully recharges in approximately four and a half hours, depending on the state of the power bank battery when charging begins, and the charger used to juice it up.

The speaker won't turn on or turns off quickly.

Then, you can play it again for roughly twenty hours before it runs dead again. Other AC USB chargers may take more time to fully recharge the speaker. We assume that you recharge this speaker with the charger that accompanies it.

Plus, with Prime Day around the corner, and Black Friday coming this November, expect some good deals on last-gen speakers like the Charge 3. Power the speaker back on and the LED light should be blinking blue, meaning that you were successful in resetting the speaker. Try pressing the power button on the top of the device.

This next-in-line lighting is another indication that the Charge 3 is in fact, charging. Sa batterie à haute capacité de 6000 mAh offre 20 heures … Though the speaker does get plenty loud, highs never become harsh even when indoors.

04/28/2019 I didn't blow it and the battery is full (all 5 light are on). Completely brand new arrived yesterday and it worked for 10 min and battery dieded.when I turn it on and press Bluetooth and volume up it completely turns off and I unplugged it and it’s just black.

2) i tried every combination possible… no good! The device may begin functioning after resetting. This speaker, released in 2016, is the 4th portable wireless speaker in the JBL Charge line.

Make sure your speaker and device are paired. The model is slowly but surely being phased out, but if you’re in the market for a more affordable option we definitely recommend checking this out. If this fails you may need to replace the battery. I replaced my battery after trying several things….and it was the battery after all :). But if you want the perfect mix of both, I have no problem recommending the Charge 3. This model is IPX7 waterproof, meaning that you can submerge it completely in water.

Then, plug the USB connector end of the charge cord into the matching micro USB input port on the speaker, as shown next.

Counterfeit products are not authentic and therefore do not meet the high quality and safety standards established by JBL These products are inferior and usually fail a short time after first use due to poor components & expose consumers to potential safety hazards even when not in use. First, make sure the device is charged. Also, the speaker heats up a bit during charging as does its USB charger. When the battery inside is  dead all the way, the light on the far left blinks white while charging. All of the sudden the JBL would not function and power down once unplugged.